<pre>
set echo on;
--**************************************************************
-- Object Access script
--
-- This script is a modification of an Oracle-supplied script.
-- The script creates a stored procedure that executes EXPLAIN
-- PLAN for every SQL statemment in the library cache, and runs
-- counting reports against the EXPLAIN PLAN output.
--
-- The following reports are produced:
--
-- 1. Full-table scan counts by table (with num_rows)
-- 2. Table acces by ROWID by table
-- 3. Index full scans 
-- 4. Index range scans
-- 5. Index unique scans
--
-- Modified from the Oracle script by Donald K. Burleson
-- 3/6/2000  modified to add/use get_sql function by John Beresniewicz
--           NOTE: Oracle8i bug in V$SQLTEXT will cause this not to work there
-- 3/6/2000  modified to work around signed/unsigned problem in hash values
-- 3/6/2000  modified to only call function where LENGTH(SQLTEXT)>1900 chars in length
-- 3/6/2000  modified to try signed AND unsigned hash values
--
-- NOTE: requires direct GRANT SELECT on V_$SQLTEXT
--       requires direct GRANT SELECT on V_$SESSION, V_$MYSTAT
--**************************************************************
set serveroutput on size 100000

set echo off;
prompt We first gather all SQL in the library cache and run EXPLAIN PLAN.
prompt This takes awhile, so be patient . . . 

--set echo on
--set feedback on

set feedback off
set echo off 

-- Drop and recreate PLAN_TABLE for EXPLAIN PLAN 
-- drop table plan_table; 
-- @$ORACLE_HOME/rdbms/admin/utlxplan
delete from plan_table;

Rem Drop and recreate SQLTEMP for taking a snapshot of the SQLAREA 
drop table sqltemp; 
create table sqltemp 
(
   ADDR        VARCHAR2 (8)
  ,HASHVAL     INTEGER 
  ,SQL_TEXT    VARCHAR2(2000) 
  ,DISK_READS  NUMBER 
  ,EXECUTIONS  NUMBER 
  ,PARSE_CALLS NUMBER
  ,PARSE_USER  VARCHAR2(30)
  ,STMT_ID     VARCHAR2(100)
); 

--set echo on 
set feedback on

CREATE OR REPLACE PROCEDURE do_explain 
   (addr IN  VARCHAR2
   ,hash IN INTEGER
   ,sql_text_IN IN VARCHAR2
   ,parse_user_IN IN VARCHAR2
   ,stmt_id_IN IN VARCHAR2 )
AS 

   dummy    VARCHAR2(32767);

   dummy1   VARCHAR2(100);  

   mycursor INTEGER; 
   ret      INTEGER; 
   my_sqlerrm VARCHAR2 (85);
   signed_hash  NUMBER;

   FUNCTION get_sql(addr_IN IN VARCHAR2, hash_IN IN INTEGER)
   RETURN VARCHAR2
   IS
      temp_return  VARCHAR2(32767);
      CURSOR sql_pieces_cur
      IS
      SELECT sql_text
        FROM v$sqltext
       WHERE address = HEXTORAW(addr_IN)
         AND hash_value = hash_IN
      ORDER BY piece ASC;
   BEGIN
      FOR sql_pieces_rec IN sql_pieces_cur
      LOOP
         temp_return := temp_return||sql_pieces_rec.sql_text;
      END LOOP;

      IF temp_return IS NULL
      THEN
         RAISE_APPLICATION_ERROR(-20000,'SQL Not Found');
      END IF;

      RETURN temp_return;
   END get_sql;

   FUNCTION current_schema RETURN VARCHAR2
   IS
      temp_schema   v$session.schemaname%TYPE;
   BEGIN
      SELECT schemaname
        INTO temp_schema
        FROM v$session
       WHERE sid = (SELECT MAX(sid) FROM v$mystat);
      --
      RETURN temp_schema;
   EXCEPTION
      WHEN OTHERS THEN RETURN NULL;
   END current_schema;

BEGIN
   -- adjust signed_hash if hash > 2**31
   -- (hash type mismatch between v$sqlarea and v$sqltext)
   IF hash > POWER(2,31)
   THEN
      signed_hash := hash - POWER(2,32);
   ELSE
      signed_hash := hash;
   END IF;
   
   
   dummy1 := 'ALTER SESSION SET CURRENT_SCHEMA ='||parse_user_IN ;


   dummy:='EXPLAIN PLAN SET STATEMENT_ID='''||stmt_id_IN||''' INTO plan_table FOR ' ; 
   IF LENGTH(sql_text_IN) > 1900
   THEN
      BEGIN  -- try to get using hash first, and unsigned hash if not found
         dummy:=dummy||get_sql(addr,hash);
         
      EXCEPTION
         WHEN OTHERS THEN dummy:=dummy||get_sql(addr,signed_hash);
                         
      END;
   ELSE
      dummy := dummy||sql_text_IN;
   END IF;

   -- JB: optimization = only change schema if different from current
   --IF parse_user_IN != current_schema
   --THEN
   --   dbms_output.put_line(current_schema||' '||parse_user_IN);
   --   mycursor := DBMS_SQL.OPEN_CURSOR;
   --   DBMS_SQL.PARSE(mycursor,dummy1,DBMS_SQL.NATIVE); 
   --   ret := DBMS_SQL.EXECUTE(mycursor);
   --   DBMS_SQL.CLOSE_CURSOR(mycursor);   
   --END IF;

   mycursor := DBMS_SQL.OPEN_CURSOR;
   DBMS_SQL.PARSE(mycursor,dummy,DBMS_SQL.NATIVE); 
   ret := DBMS_SQL.EXECUTE(mycursor);


   DBMS_SQL.CLOSE_CURSOR(mycursor); 


   COMMIT; 
EXCEPTION -- Insert errors into PLAN_TABLE... 
   WHEN OTHERS
   THEN 
      my_sqlerrm := SUBSTR(sqlerrm,1,80); 
      INSERT INTO plan_table(statement_id,remarks) -- change to plan_table (JB) 
      VALUES (stmt_id_IN, my_sqlerrm);
       
      -- cleanup cursor id open
      IF DBMS_SQL.IS_OPEN(mycursor)
      THEN
         DBMS_SQL.CLOSE_CURSOR(mycursor); 
      END IF;

END; 
/


show errors

DECLARE

   CURSOR  c1
   IS
   SELECT 
          RAWTOHEX(SA.address) addr
         ,SA.hash_value        hash
         ,SA.sql_text          sql_text
         ,SA.DISK_READS        diskrds
         ,SA.EXECUTIONS        execs
         ,SA.PARSE_CALLS       parses
         ,DU.username          username
         ,SUBSTR(RAWTOHEX(SA.address)||':'||TO_CHAR(SA.hash_value) , 1,30) stmt_id
     FROM
          v$sqlarea   SA
         ,DBA_USERS   DU
    WHERE 
          command_type in (2,3,6,7) 
      AND 
          SA.parsing_schema_id != 0
      AND SA.parsing_schema_id = DU.user_id; 

   CURSOR c2
   IS 
   SELECT 
          addr
         ,hashval
         ,sql_text
         ,parse_user
         ,stmt_id
     FROM 
          sqltemp
    ORDER BY parse_user; 

BEGIN 
   FOR c1_rec IN c1
   LOOP
      INSERT INTO
         sqltemp (ADDR
                 ,HASHVAL
                 ,SQL_TEXT
                 ,DISK_READS
                 ,EXECUTIONS
                 ,PARSE_CALLS
                 ,PARSE_USER
                 ,STMT_ID
                 )
         VALUES (c1_rec.addr
                ,c1_rec.hash
                ,c1_rec.sql_text
                ,c1_rec.diskrds
                ,c1_rec.execs
                ,c1_rec.parses
                ,c1_rec.username
                ,c1_rec.stmt_id
                );
   END LOOP;
   --
   FOR c2_rec IN c2
   LOOP
      do_explain(c2_rec.addr
                ,c2_rec.hashval
                ,c2_rec.sql_text
                ,c2_rec.parse_user
                ,c2_rec.stmt_id);        
   END LOOP;
END;
/

--show errors


-- ********************************************************
-- Report section
-- ********************************************************

@access_report

--drop procedure do_explain;
drop table sqltemp;
drop taamag/click/group=ros&